ORDERING INFORMATION

For ordering information, please see below.

When ordering please:
1. Specify Product / Mineral Type
2. Micron size
3. Backing Type ( mil thickness or paper w/d) plain or psa
4. Form (sheets , disks, or rolls) sizes
** If ordering rolls specify core ID size and abrasive side wound in or out (A.S.I. or A.S.O. )
5. Amount/Quantity
Abrasive pads and polishing compounds - TBS Abrasives, Inc. in Ivyland, PA
Application size chart - TBS Abrasives, Inc. in Ivyland, PA
Emery Papers available in grit sizes 4/0, 3/0, 2/0, and 1/0 in sheets and roll form
Standard Products are available with 3 mil polyester films and standard paper base “C” wet/dry and foam backing available. Both 3 mil film and paper backs are available with a pressure sensitive adhesive (P.S.A.) applied available on sheet and disks only. Above products can be converted in the following forms.

  1. Disks (1” through 12” diameters) also available in millimeters sizes
  2. Sheets up to 13” in width
  3. Rolls from (0.150” through 13” width) 50 feet minimum length

Rolls are put up on standard cores 1” and 3” I.D.
Also available in 2, 5, & 7 mil polyester film by special order.

Diamond and aluminum oxide are color coded for easy identification. Abrasive types and micron sizes, and mil thickness other then those mentioned in the above chart are available by special order.

TBS Abrasive Inc. also carries Micro Finishing Films (9um through 180um) along with coolants, slurries, compounds, polishing pads and abrasive powders.
Contact TBS Abrasives, Inc. today for more information and ordering products at 215-674-8820.